Jump to content

737ngx Wetterradar geht nicht


Recommended Posts

Hallo an alle Flusianer,

Hatte mir das Active Sky 2016 Trial mal zum testen besorgt,nur bekomme ich im Display nix angezeigt. Wettertest dagegen schon. Vielleicht könnte mir bitte jemand von euch Rat geben.:rolleyes:

Vielen Dank.

Jörg

Link to comment
Share on other sites

Hallo,

Ich vergaß noch zu schreiben,daß ich den FSX STEAM EDITION benutze. Muß ich noch irgendwas ein oder umstellen,damit mir das Wetterradar was anzeigt ? Wäre für eure Hilfe sehr dankbar.

Greetz

Link to comment
Share on other sites

  • 3 weeks later...

Hallo Jörg , habe das gleiche Problem mit der PMDG !

 

Zurzeit benutze ich Active Sky Next SP 5 . Bin damit wirklich sehr zufrieden.

Es gibt von PMDG eine Anleitung wie das Wetterradar funktionieren sollte :

Ich muss das nochmal ausprobieren und Schritt für Schritt durchgehen.

Benutze Windows 7 64 Bit mit FSX Acceleration Pack  u. aktuellste Version PMDG 737 NGX.

Aktive Sky Next benutze ich im Easy Mode um die Frames möglichst stabil u. hoch zu halten.

PMDG 737 NGX kann keine Wolken darstellen. Nur Regen u. o.ä.

Kann allerdings sein ,dass ich auch den Realism Mode einstellen sollte.

Dann kommt mein Rechner allerdings nicht mehr all zu flüssig mit.

 

Vielleicht hat jemand noch weitere Tipps ?

Ich denke die Beschreibung wird allerdings schon weiterhelfen ,

 

Vg, aus EDLW

 

Hilmar Schmidt

 

 

 

 

 

 

Weather radar troubleshooting

Below are some tips for troubleshooting the operation of the weather radar, new to the PMDG 777-200LR/F and PMDG 777-300ER as of the Service Pack 1 update and to the PMDG 737NGX as of the SP1d version.
 
Manuals:
  • Please make sure you have read the weather radar section of the SP1 Supplement in the Introduction and Use manual, as well as the ASN documentation. There is important information about use of the system in both manuals.
Software Requirements:
  • The PMDG 777-200LR/F with Service Pack 1 is required. Download the SP1 (or later) installer here:
    http://www.precisionmanuals.com/pages/downloads/updates.html

    If you purchased on or after the release of SP1 on July 18, 2014, your installer already contains SP1 and the patch version download is not necessary unless it is for a later version than SP1.

    or

    The PMDG 737NGX 800/900 base package with Service Pack 1d

    If you purchased on or after the release of SP1d on March 5, 2015, your installer already contains SP1d and a patch download is not necessary unless it is for a later version than SP1d.
     
  • The weather radar requires the latest version of Active Sky Next by HiFi Technologies Inc. (hereafter referred to as "ASN"):
    http://www.hifitechinc.com/products/activeskynext

    Ensure that you have the latest version of ASN, which is always available for download here:
    http://www.hifitechinc.com/downloads

    The radar does not function with FSX default weather or with any other weather addon besides ASN. To use ASN and the weather radar in FSX Steam Edition or Prepar3D v2.x, you need to have the SP2 version installed.
     
  • You must have Detailed clouds enabled in the FSX weather options settings. We recommend the settings shown below:

    AvatarHandler.ashx?fid=31849&key=2250378

    Not enabling detailed clouds can produce a block pattern on the ND as shown below. This is not because our radar is showing clouds, it's because the detailed precipitation boundaries that ASN injects into FSX get downsampled into very coarse resolution boxes like this when Simple clouds are enabled.

    AvatarHandler.ashx?fid=31850&key=3334872
ASN Connect:
  • ASN's AS Connect module dll file (as_btstrp.dll) must be properly installed into FSX's dll.xml file and must be authorized to load into FSX. Normally this should happen automatically the first time you run ASN. FSX itself should be closed before you run ASN for this to occur properly.

    AS Connect's dll.xml should look like this:
      <Launch.Addon>
        <Name>as_connect</Name>
        <Disabled>False</Disabled>
        <Path>as_srv\as_btstrp.dll</Path>
      </Launch.Addon>
    If the dll.xml file is missing this entry or the file is corrupted by formatting errors (a common issue unfortunately), then the radar will not function. If you believe your file is corrupted, submit it to us in a support ticket and we'll fix it for you if necessary.
  • Users have reported to us that they had to run ASN with the right click menu "Run as administrator" command to get the module to install properly. Try this if you're having trouble - most likely this will occur on systems where FSX is installed to the default C:\Program Files (x86) folder instead of it's own custom folder like C:\FSX that's outside of the Windows Vista/7/8 read/write permissions protections placed on the folder.
FSUIPC issues:
  • ASN, much like the 777 itself, uses SimConnect and does not require FSUIPC. Claims that the radar needs FSUIPC installed to work are incorrect - it is not dependent on FSUIPC. Do not try to use any of FSUIPC's weather options while using ASN (smoothing etc) - ASN will override any of them.
     
  • We have verified that the latest version of FSUIPC (currently 4.939j) does not have any issues with the radar - if you use FSUIPC, we recommend always having the latest version installed as some users have reported that older versions do stop the radar from working via some unknown conflict with it:
    http://forum.simflight.com/topic/66139-updated-modules/
     
  • There is a document in the FSX\Modules\FSUIPC Documents folder called "ASN WX Radar facilities in FSUIPC4.pdf. This document describes FSUIPC4.ini settings and LUA scripts that can be used to create ASN radar displays in other addons that are programmed using FSUIPC instead of SimConnect. (it essentially acts as a frontend/passthrough for SimConnect) This can be problematic because ASN does not support sending data to two different radar addons at once.

    The FSUIPC4.ini (located in FSX\Modules) entries are:

    ASNwxRadarPath =
    ASNwxRadarBitmapPath =

    The LUA script files (located in FSX\Modules) are:

    WXRadar.lua
    WXRadar.mcro
    WXRadar.FSQ

    If you are having issues with the radar and these entries or files are present, trying removing them.
External ASN radar addons:
  • If you are using an external weather radar addon gauge such as the freeware one by Avsim forum user Bryn (which many people installed prior to the release of the 777 SP1) this needs to be removed from your 777's panel.cfg. ASN does not support feeding data to multiple radar gauges at once.
Correlation with ASN's map:
  • Firstly, ASN's map must be in the "Detail" mode for any correlation with the radar in the airplane to be valid. When the ASN map is outside of the Detail mode range, it's showing more generic images that will not necessarily match up with what you see in the sim.

    This is what the detail mode looks like, you should see a checkmark next to the Detail button and the radar imagery should look like this:

    AvatarHandler.ashx?fid=31772&key=3557898

    If you see the type of display show below, you are not in detail mode. Detail mode has a maximum range of 90 nm - if you set a larger range than 90, then by definition you are not in detail mode:

    AvatarHandler.ashx?fid=31773&key=3537605
     
  • ASN's map view provides something akin to what's known as a "radar summary" in meteorology terms. What this means is that the strongest precipitation return *regardless of altitude* is being shown. If a particular return is far below your aircraft (while at cruise altitude for instance), you may see it there on the ASN map, but not on the ND in the airplane, depending on the tilt setting you're using. The radar in the airplane is not a summary image - it only shows returns within the altitude range that is being scanned by the current tilt setting.
Misunderstandings about radar:
  • Real life radars show precipitation (rain, hail, ice crystals, etc.), not clouds. Many previous radar implementations in FSX were simply showing cloud positions or making guesses about possible precipitation locations by using cloud locations in conjunction with environmental parameters (temperature, dewpoint etc). We've received tickets from users that show situations like a fair weather cumulus cloud in front of the aircraft with the ND circled in red because the user thinks the cloud should be showing up on the radar. This is not the case - unless there is actual precipitation falling in or from the cloud (according to ASN), you will not see a return on the radar.
     
  • As mentioned earlier, the tilt setting is important - if precipitation does not lie within the scan cone of the radar beam at the tilt setting you have selected, you will not see anything on the ND.
     
  • Gain is also important - the automatic gain setting is not going to show a lot of light precipitation (green color on the ND) unless it's turned up manually. Light rain is generally not a threat to a large commercial aircraft, so you'll often only see yellow and red areas that indicate the cores of thunderstorm cells.
Radar brightness on the ND:
  • Make sure that you have the radar/terrain layer brightness turned up/on on the ND - this is controlled by the smaller inner knob on the lighting panel to the lower left of the captain's side PFD or to the lower right of the first officer's side PFD:

    AvatarHandler.ashx?fid=31775&key=3293862
Link to comment
Share on other sites

Wie er schon oben schreibt.

 

Wäre noch gut zu wissen, welche Wettersituation du hattest. Du kannst in AS16 ein preset wählen, zum Beispiel Hurricane Blast oder Blizzard. Dann solltest du auf jeden Fall etwas auf dem ND sehen.

Link to comment
Share on other sites

  • Deputy Sheriffs
36 minutes ago, Hilmi said:

PMDG 737 NGX kann keine Wolken darstellen. Nur Regen u. o.ä.

Das ist auch richtig so. EIn Wetterradar stellt keine Wolken dar, sondern nur Regen, denn der wird vom Radar reflektiert, Wolken dagegen nicht.

Etwas vereinfacht ausgedrückt. Detailierte Erklärungen im Netz oder, sofern man den Aerosoft Airbus besitzt in dessen Doku.

Link to comment
Share on other sites

  • 2 weeks later...

Hallo,

kämpfe leider immer noch mit dem Wetterradar bezogen auf die PMDG 737 NGX.

 

Habe mir sogar AS 2016 gekauft alle Einstellungen wie in Pmdg im Flugsimulator ausgeführt um dem Pogramm das Wetter zu überlassen.

Neuste PMG Version installiert zuvor sauber deinstalliert. Leider ohne Erfolg. Fsuipc aktuelle Version und LUA script files gelöscht sowie clear all weather settings ausgeführt.

Auch die manuelle Simualtion AS2016 von Regen funzt nicht im FSX  ( Flight 1 RAINFIX ist installiert u. FSX Wetter,Regen u.ä. wird super angezeigt).

AS2016 ist stets connected Ordner sind alle richtig installiert,Wetter aktuell update ausgeführt. Easy Mode, Realism Mode,Default Mode kein Wettrradar angezeigt in der PMDG 737 NGX

selbst im real live Mode bei strömmenden Regen.

Ich benutze den FSX mit Accelration Pack Windows 7 64 Bit. 

Momentan hege ich die Vermutung ,dass das Pmdg 737 NGX Wetterradar nur unter FSX Steam oder Prepare 3D funktioniert (s.o.Text PMDG).

Funktioniert es nur unter Steam oder Prepare 3 D ?

Andere verlässliche Quellen habe ich bislang nicht finden können .

 

So langsam gebe ich auf .....

Vielleicht hat jemand noch eine zündende Idee und kann mir helfen ? Wäre klasse !!

 

Ich benutze den FSX mit Accelration Pack Windows 7 64 Bit.

 

Vg aus EDLW und ein schönes Wochende

 

Link to comment
Share on other sites

Nein, es funktioniert auch mit der normalen FSX Version.

 

Meine Vermutung ist, dass bei dir etwas anderes nicht stimmt.

 

Stell dich mal testweise in München auf. Schalte die PMDG ein oder setze sie auf Default im FMC. Dann geh in AS16 auf manuell und stell dort EDDM (Blizzard) ein. Dann müsste es nach einer kurzen Zeit in München zum hantieren anfangen und das WXR sollte ausschlagen (einfach nur im EFIS einschalten).

Link to comment
Share on other sites

Hallo , vielen  Dank für  die  Hilfe. Ich werde  die Maschine nochmal in den default Modus versetzen u. manuell einen Blizzard erzeugen. Den WxR Knopf hatte ich  aktiviert.  Vg 

Link to comment
Share on other sites

  • 1 month later...

Hallo ,

 

leider habe ich immer noch das Problem bei der Pmdg 737 ngx und der Tripple Seven das ASN Wetter nicht dargestellt wird .

Selbst über Aktive Sky manuell erzeugt passiert da nichts.

 

War daher mit Kyle Rodgers Pmdg Support in Kontakt .

Sind uns relativ einig geworden ,dass das wohl nicht an PMDG liegt sondern irgendwo ein Problem von Aktive Sky Next sein könnte

und habe daher auf seinen Rat Aktive Sky auch nochmal angeschrieben.

Beide Addons sind sauber installiert mit neuster Version.

 

Benutze Aktive Sky Next SP5.

Aktive Sky Einstellungen /FSX Einstellungen habe ich auch schon mehrfach überprüft.

Pfade der Installation alle korrekt sowie Ordner FSX Hauptverzeichnis vorhanden.

Log Export ASN ausgeführt und im FSX Hauptverzeichnis abgespeichert.

Wetter refresh ausgeführt.

 

Bin seit ca.15 Jahren mit FS9 und FSX betraut. Was ich bislang machen bzw. überprüfen mit allen Tricks ist nun ausgeschöpft.

Ich hoffe ASN hilft mir bei der Lösung.

Vielleicht hat ja noch jemand in der Community den entscheidenden Tipp.

Würde mich freuen .

 

Viele Grüße

Hilmar

EDLW

 

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. Privacy Policy & Terms of Use